Installing The Switch; Verifying The Package Contents; Reviewing Safety Guidelines - Allied Telesyn AT-8316F/MT Guía De Instalación Rápida

Installing the Switch

The following sections explain how to install the Ethernet switch in your
network.

Verifying the Package Contents

Make sure the following components are included in the switch package. If
any of these items are missing or damaged, contact your sales representative.
"
One AT-8316F/MT, AT-8316F/VF, AT-8316F/SC, or AT-8324 switch
"
Two mounting brackets
"
Six flathead Phillips screws
"
Power cord (Americas, EC, Australia, and UK only)
"
This Quick Install Guide
"
Warranty card
"
One AT-CABLE-4 cable

Reviewing Safety Guidelines

Please review the following safety guidelines before you begin to install the
Ethernet switch. Refer to Appendix A on page 15 for translated safety
statements in your language.
Class 1 laser product. ! 6
Do not stare into the laser beam. ! 7
Electric Shock Hazard: To prevent electric shock, do not remove
the cover. There are no user-serviceable parts inside. The unit
contains hazardous voltages and should only be opened by a
trained and qualified technician. ! 8
AT-8316F and AT-8324 Quick Install Guide
Warning
Warning
Warning
3