DeWalt D28490 Manual De Instrucciones página 28

................. Class I Construction
(grounded)
................. Class II Construction
(double insulated)
.../min .......... revolutions per minute ....................... speed
BPM ............. beats per minute
IPM ............... impacts per minute
SPM ............. strokes per minute
sfpm ............. surface feet
..................... per minute
.....................
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. All D WALT tools are factory tested; if this tool does not
e
operate, check the power supply.
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger Switch
B. Lock On Button
C. Spindle Lock
or AC/DC ...alternating
........................or direct
current
n o ....................no load
n ......................rated
........................speed
.....................earthing
terminal
.....................safety alert
symbol
D. Guard
E. Side Handle
FIG. 1
C
INTENDED USE
Your angle grinder has been designed for professional grinding and
cutting applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
DO NOT use grinding wheels other than center depressed wheels
and flap­disk.
This heavy­duty angle grinder is a professional power tool. DO NOT
let children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
Features
SWITCH
The tool is controlled by a trigger switch (A). A lock­on button (B)
provides increased comfort in extended use applications.
MULTIPLE SIDE HANDLE POSITIONS
The side handle can be properly positioned in two locations based on
personal preference and application. The side handle must be used at
all times to maintain proper control of the tool.
26
B
A
E
D