Samsung 8+ Serie Manual Del Usuario página 6

Changing the Input Source
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player
/ cable box / STB satellite receiver.
■ TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB / AllShare
✎
In the Source, connected inputs
will be highlighted.
✎
Ext. and PC always stay activated.
Edit Name
In the Source, press the TOOLS
can set an external input sources name you want.
■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC /
DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device connected to the
input jacks to make your input source selection
easier.
✎
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this
may cause the TV to malfunction.
SOURCE
button, and then you
Maximum thickness - 0.55 inches (14mm)
•
Connecting to an Antenna
ANT 2 IN
(SATELLITE) ANT 1 IN
English - 6
✎
When connecting a PC to the
port with HDMI cable, you should set the TV to
PC mode under Edit Name.
✎
When connecting a PC to the
port with HDMI to DVI cable, you should set the
TV to DVI PC mode under Edit Name.
✎
When connecting an AV devices to the
port with HDMI to DVI cable, you should
1(DVI)
set the TV to DVI Devices mode under Edit
Name.
Edit Favourites
In the Source, press the TOOLS
Favourites. You can set an external input source to
Favourites.
Information
You can see detailed information about the selected
external device.
Refresh
In the Source, If the external devices is not displayed,
press the TOOLS button to select Refresh. Searching
for connected devices.
Cable Satellite
or
HDMI IN 1(DVI)
HDMI IN 1(DVI)
HDMI IN
button to select Edit
VHF/UHF Antenna