GB
IE
- After contact with foreign ob-
jects or if abnormal vibration
occurs.
• Do not submerge the device in
water and do not operate it in a
damp environment.
• Do not submerge the device in
water!
• Do not touch the device with
wet or damp hands!
This is how to avoid damage to the
equipment and possible personal
injuries resulting from this:
• Make sure before use that the
device is properly assembled
and that the filters are in the cor-
rect position.
• Do not operate the device with-
out filters. The device could be-
come damaged.
• Only use original spare parts and
accessories (see "Spare parts/
accessories") which are supplied
and recommended by our service
centre. Using externally pro-
duced parts results in the imme-
diate loss of the warranty claim.
• Only have repairs performed by
customer service centres author-
ized by us.
• Comply with the device's cleaning
and maintenance instructions.
• Store the device in a dry place
and out of reach of children.
• Do not use non-rechargeable
batteries.
• Remove the rechargeable bat-
tery from the device before
charging.
• Do not mix different types of
batteries or new and used bat-
teries when using the device.
• When inserting the battery, pay
18
attention to correct polarity.
• Remove discharged batteries
from the device and dispose of
them in accordance with local
regulations. We recommend
covering the contacts with an
adhesive strip to protect against
short circuits. Do not open the
battery.
• Remove the rechargeable bat-
tery from the device before stor-
ing the device for a long period
of time (winter storage).
• When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other small
metal objects that could cause
the contacts to be bridged.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 20 V Team series.
A detailed description
of the charging process
and further information
can be found in the se-
parate operating inst-
ructions.
Initial start-up
Before each use, ensure the filter (3) and
filter holder (2) are sitting correctly in the
collection container (1).
Also inspect the device visually for damage.