Eco-Flo EFSUB5-102-1 Manual Del Usuario página 2

STOP Before you start
Selecting the Correct Pump
Before you remove and reinstall your submersible well pump, let's review
your well condition and the pumps capabilities.
WELL LOG INFORMATION
The driller that drilled your well should have given you a 'well log'
summarizing the:
In some counties this information is recorded at the health office or other offices of the
county and/or the driller may have retained the information in the driller's file.
You need a copy of the well log or this information from the well log.
If you can not find the well log, you will need to drop a weighted string in
the well to:
length of string from the weighted end of the string that is wet.
NOTE, your pump needs to be installed at minimum 5' above the bottom of the well
and 15-20' below the surface of the water column in the well.
For parts or assistance, call ECO-FLO Customer Service at 1-877-326-3561
A. Depth that the well was drilled, ie 170 ft. from the surface.
B. Depth to what level the water rose in well, ie 130 ft. from the
surface
C. Depth to what level the water dropped to with the test pump
pumping in your well, ie dropped 20' to 150' from the surface
when pumping continuously
D. The gallons per minute your pump pumped, ie 10 GPM
A. Record the depth when it hits the bottom of the well.
B. The depth at which water is standing in the well, ie the
2