Installation And Setup - Jabra GO 6470 Guia De Inicio Rapido

INSTALLATION AND SETUP

Step 1: Attach/adjust a headset wearing-style
Included in the standard package are the headband
and ear hook wearing styles. The headset is delivered
already attached to the ear hook, shown below. Slide
the attachment up or down until the headset fits most
comfortably to your ear.
You can instead attach the headset to the supplied
headband, shown below. To do this, first detach
the ear hook and then press the headset into the
headband's attachment socket. Once assembled,
you can rotate the headset for use on either ear.
For further details on attaching/detaching wearing
styles, refer to the procedures in the full user manual
on the CD-ROM supplied with your headset.
Step 2: Apply power to the base
Connect the mains power adapter to the base's power
port (marked with ), then plug it into a mains
power socket.
US
A setup wizard automatically launches on the
touchscreen.
English
Italian
Norwegian
Step 3: Connect the base to your desk phone
Let the wizard guide you through the task of
connecting your desk phone to the base.
The way in which you connect the two devices will
vary according to whether the phone has a headset
port and whether it has an electronic hook-switch or
remote handset lifter (such as the GN1000).
You need to determine this yourself. For example, you
might already have an electronic hook-switch (EHS)
installed or you might have ordered a remote handset
lifter (such as the GN1000) together with your headset
package. You can use the wizard to configure your EHS
connection (if any).
Note: Connection to a phone which includes an
electronic hook-switch requires a model-specific
adapter from Jabra. See the user manual for more.
DESK PHONE
SETUP
Connect to a desk
Congratulations on your
phone
new jabra GO 6400!
This guide will help you
assemble and configure
your headset solution.
Yes No
3 Sec.