marklin 81705 Manual De Instrucciones página 7

Several feeder Tracks
On medium size and larger layouts power must be fed to the
track at several points.
Several track circuits
In order to be able to control several locomotives separate-
ly, the layout must be divided into several track circuits by
installing rail insulators (8954). Each track circuit has its own
Transformer with at least one feeder track. Please be sure
to observe at all times the safety precautions given above
when using several transformers.
Installing the 8954
insulated rail joiners
Connecting Lights or Solenoid Accessories
Model railroad lights or solenoid accessories such as turn-
out or signal mechanisms are connected to the constant 10
volt AC current output on a transformer. All of the transfor-
mers described in these instructions have a pair of terminals
for this connection (yellow + grey terminal clips).
Model railroad lights in buildings and/or street lights are
connected directly to the yellow terminal clip and grey
terminal clip on the Transformer.
brown
red
7