Bodum BISTRO 11348 Manual De Instrucciones página 5

Topping up the mill with seasonings
• place the mill on a level and clean surface.
• hold the mill by the mill housing (1) with
one hand. turn the cap (3) in a counter-
clockwise direction to remove it from the
housing and open the mill seasoning lid
(5a/5b).
• now top up with pepper/salt, using the
appropriate openings. it is also possible
to add alternative spices or seasonings
for milling if required. note: the mill sea-
soning lids (5a+5b) are marked with the
letters "p" for pepper and "s" for salt.
• close the mill seasoning lid (5a/5b) once
more and turn the cap (3) in a clockwise
direction to screw it back onto the housing.
Using the mill
• once you have inserted the batteries and
topped up with milling seasonings hold the
mill firmly in one hand and tip it forward at
least 90°, in the direction of the salt/pepper
opening.
• the mill will begin to work automatically,
as soon as it is tipped more than 90°.
Adjusting the milling fineness
• in order to obtain a coarser milling result
turn the adjustment screw (7) on the front
of the mill in a counter-clockwise direction.
• in order to obtain a finer milling result turn
the adjustment screw (7) on the front of
the mill in a clockwise direction.
Cleaning and maintenance
• do not leave depleted batteries in the mill.
• always replace all 6 batteries at the same
time. avoid using old and new batteries
together at the same time.
• clean the external parts of the mill with a
dry cloth. never put the mill into the dish-
washer and do not immerse it in water.
38 english