Technical Data; Noise/Vibration Information - Bosch AKE 30-19 S Manual Original

OBJ_BUCH-1238-001.book Page 28 Friday, April 30, 2010 9:39 AM
28 | English

Technical Data

Chain saw
Article number
Rated power input
Chain speed (no-load)
Chain bar length
Chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic chain oiler
Toolless chain tensioning (SDS)
Nose sprocket
Kickback brake
Run down brake
Metal gripping teeth
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of un-
favourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.

Noise/Vibration Information

Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 95 dB(A);
sound power level 103 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
F 016 L70 667 | (30.4.10)
W
m/s
cm
mm
ml
kg
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
2
=6.0 m/s , Uncer-
h
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
AKE 30-19 S AKE 35-19 S
3 600 H36 D.. 3 600 H36 E..
1900 1900
12
30
3/8" – 90 3/8" – 90
1.1 (0.043") 1.1 (0.043")
45
200 200
–
4.3
/II
AKE 40-19 S
3 600 H36 F..
1900
12 12
35 40
3/8" – 90
1.1 (0.043")
52 57
200
4.4 4.5
/II /II
Bosch Power Tools