Publicidad
Idiomas disponibles
Idiomas disponibles
• The filters must be cleaned every 2 months, or more frequently
in case of particularly heavy use of the hood. Filters can be
washed in a dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having disconnected the
relative fastening elements.
• Wash the filters, taking care not to bend them. Let them get dry
before refitting them. (The colour of the filter surface may
change throughout the time but this has no influence to the fil-
ter efficiency).
• When refitting the filters, make sure that the handle is visible
on the outside.
• Close the sliding suction panel.
• These filters are not washable and cannot be regenerated, and
must be replaced approximately every four months or more
frequently by particularly heavy use.
• Pull out the sliding suction
• Remove the grease filters.
• Remove the saturated carbon filter by releasing the fixing
hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction panel.
9 W fluorescent light s.
• Remove the metal terminals fixing the glass.
• Slide the glass cover out of one of the fastening clips. Lower
the unfastened part of the glass cover slightly, so that the cover
can be completely removed.
• Replace the light with a new one of the same type and rating.
• Replace the glass cover in reverse order.
EN
panel.
2
29
9
Publicidad
