Bematech MP-4000 TH Guia De Inicio Rapido página 11

Drivers:
This package installs the Windows API driver, Manuals, User Software, Printer and the Spooler
driver.
? DO NOT connect your printer prior to installing the drivers.
1. Run the file (BemaSetupMP4K.exe).
2. Select the installation wizard language and press OK.
3. Read the initial instructions on the Welcome Window and press NEXT.
4. The wizard will automatically install the drivers and system libraries.
5. Select the printer Interface and the port and configuration depending on the chosen interface. For
Ethernet, fill in the printer IP address. Press INSTALL.
6. Connect your MP-4000 TH to the installed port in your PC, make sure that it is turned on and with
paper loaded.
7. Select whether you wish to print a test page or not.
The default spooler driver configurations are:
1. regular (non-scalable)
2. 76mm (3in) / 30cm (11.8in) print width / page length
To change the printer properties you may right click on the MP-4000 TH icon under START\Printers
and Faxes and launch the properties menu.
External cleaning:
Clean the external cabinet with a soft cloth, moistened in water or neutral detergent. Never use a
tow chemically treated or chemical substances like alcohol or similar solvent. The use of these
products can make the cabinet of the printer changes its color or be deformed.
11