Before Use; Product Assembly - cecotec BigDry 2500 Essential 360 Manual De Instrucciones

ENGLISH

3. BEFORE USE

• Take the product out of the box and remove all packaging material.
• Make sure all parts and components are included and in good conditions. If any visible
signs of damage are observed, contact the Technical Support Service immediately.
• Always keep the dehumidifier in an upright position to avoid leakages.
• When installing the device, ensure a minimum safety distance of 30 cm to each of its
sides.
4. OPERATION
1. Connect the power adapter to the dehumidifier and then plug it into a power socket.
2. Press the on/off button (1) to turn the unit on, the power indicator will light up blue.
3. Press the on/off (1) button again to switch the device off, the power indicator should turn off.
Draining collected water
1. The water tank in this unit has a maximum capacity of 2 litres, with a 750 ml per day
working capacity.
2. The power indicator (2) will turn yellow once the water tank is full and the unit will
automatically turn off.
3. Disconnect the power cable from the unit.
4. When the water tank is full, avoid tilting it, carefully pull it out and drain the water through
the water outlet.
BIGDRY 2500 ESSENTIAL 360
26
05603_BigDry 2500 Essential 360_YV_01190912.indd 26 12/9/19 17:36