Vortice Depuro Plus 230 Manual De Instrucciones página 27

ENGLISH
Note: Failure to clean or replace filters causes serious problems for system efficiency, including:
- increase in pressure losses in the air circuit and reduction of air flow
- decrease in device yield and worsening of comfort in the environment.
Note: saturated filters are the most common cause of device blocking.
Disinfection module
The photocatalysis module in the Evo models contains a UV-C lamp that needs to be replaced every two years,
on average.
12
1.
2.
13
1. Remove the top panel on the rear
of the device;
2. remove the connector.
1. Remove the lamp.
27