Vortice Reg Depuro Plus Manual De Instrucciones página 33

ENGLISH
Reset of filter operating time F7 (r f7)
The current hours of use of the F7 filter are shown. To reset the counter (e.g. when the filter is replaced), press
ON/OFF. The display will show
"HF OOOOO", and will go back to the main screen. If ON/OFF is not pressed, after a few seconds the display
will return to the main screen without resetting the counter.
Reset of filter operating time pre-filter (r PF)
The current hours of use of the pre-filter are shown. To reset the counter (e.g. when the filter is replaced), press
ON/OFF. The display will show
"HP OOOOO", and will go back to the main screen. If ON/OFF is not pressed, after a few seconds the display
will return to the main screen without resetting the counter.
Reset of filter operating time H14 (r h14)
The current hours of use of the H14 filter are shown. To reset the counter (e.g. when the filter is replaced), press
ON/OFF. The display will show
"HH OOOOO", and will go back to the main screen. If ON/OFF is not pressed, after a few seconds the display
will return to the main screen without resetting the counter.
Reset of UV-C lamp operating time (r LU)
The current hours of use of the UV-C lamp are shown. To reset the counter (e.g. when the lamp is replaced),
press ON/OFF. The display will show
"HL OOOOO", and will go back to the main screen. If ON/OFF is not pressed, after a few seconds the display
will return to the main screen without resetting the counter.
33