Vortice Reg Depuro Plus Manual De Instrucciones página 43

ENGLISH
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 51: Start time schedule period 2 SATURDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 52: End of time programming period 2 SATURDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 53: Start time schedule period 1 SUNDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 54: End of time programming period 1 SUNDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 55: Start time schedule period 2 SUNDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 56: End of time programming period 2 SUNDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Note [EEPROM]: The values of the read / write registers are saved in EEPROM every time they are written to.
43