Pleasant Hearth 18-45-66 Instrucciones De Montaje página 3

Carefully remove all pieces from carton and make sure
that you have all parts listed (refer to parts list on page 1).
If you are missing parts, please call GHP customer
service at 1-877-447-4768.
1. Lay bottom frame (B) upside-down on a flat surface.
Screw feet (F) into pre-threaded holes in bottom frame (B).
2. Insert 2 wood dowels (AA) into pre-drilled holes in
each end of top brace (E). Slip top brace (E) into pre-
drilled holes in edge of right side frame (C) and left side
frame (D) as shown.
3. With bottom frame (B) sitting upright on a flat surface,
insert 6 wood dowels (AA) into pre-drilled holes in bottom
frame (B). Slip side frame assembly over wood dowels
and into pre-drilled holes as shown. Insert Phillips screw
(BB), spring washer (DD), and washer (CC) into each of
4 pre-drilled holes in base of side frame assembly and
tighten securely.
Figure 1
Figure 2
Figure 3
2