Infrared Sensor Function - Elta 4518 Manual Del Usuario

02-4518-EN.qxp 12/4/06
CAUTION
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Do not place the unit in closed bookcases or racks without proper ventilation.
- To prevent fire or shock hazard, do not expose unit to rain or any type of moisture.
- The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibrations or placed in a dusty
environment.
- Do not use abrasive, benzene, thinner or other solvents to clean the surfaces of the unit. To clean, wipe it will mild non-
abrasive detergent solution and clean soft cloth.
- Never attempt to insert wires, pins or other such objects into the vents or opening of the unit.
- Do not place the unit near the light on table lamp. The light will affect the reception of the infrared sensor function.
SPECIFICATIONS
Frequency range :
Speaker impedance :
Battery backup :
Power source :
Weight :
WARNING
To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture.
NOTE
Do not connect FM antenna to outside antenna.
Dripping warning:
The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the product.
Ventilation warning:
The normal ventilation of the product shall not be impeded for intended use.
Disconnect device warning:
Main plug is used as the connection, so is should always remain ready operate.

INFRARED SENSOR FUNCTION

1. The radio Off mode, infrared display alarm 1 and alarm 2 time
- Hand on top of sensor (6) within
1 second to show the alarm 1 time
3:02 PM Page 17
AM 525 - 1610 kHz
FM 87.5 - 108 MHz
8 Ohm
3V (3 x 3V CR2025 Flat Lithium battery)
(Not included)
AC 230V ~ 50 Hz, 5 Watt
0,560 kg
- Hand on top of sensor (6) within
1 second to show the alarm 2 time
17.