AXIS Q6055-C PTZ Dome Network Camera
3
Media converter switch
4. Strip off 40 mm (1.57 in) of the multicable jacket.
5. Leave the braided shield intact and fold back the braided shield.
6. Cut off about 7–8 mm (0.27–0.32 in) of the Ethernet wire foil shields.
7. Strip off about 4–5 mm (0.16–0.20 in) of the power wire jackets.
1
Multicable jacket
2
Braided shield
3
Ethernet wire foil shield (2x)
8. Connect the network and I/O wires to the internal network and I/O connectors. Open
the lid, insert the wires and close.
9. Connect the ground and power wires to the power connector (DC output).
13