Package Contents; Description (Fig. A) - Elu BSA34 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
16 Remove the battery pack
Remove the battery pack when not in use, before
servicing and when changing accessories.
17 Have your tool repaired by an Elu authorized
repair agent.
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Additional safety instructions for battery packs
Fire hazard! Avoid metal short circuiting
the contacts of a detached battery pack
(e.g. keys carried in the same pocket as
a battery pack).
• The battery fluid, a 25-30% solution of potassium
hydroxide, can be harmful. In case of skin
contact, flush immediately with water.
Neutralize with a mild acid such as lemon juice or
vinegar. In case of eye contact, rinse abundantly
with clean water for at least 10 minutes.
Consult a physician.
• Never attempt to open a battery pack for any
reason.
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Battery charging
100
Battery charged
%
Battery defective
Do not expose to water
+40ºC
+4ºC
Charge only between 4 °C and 40 °C
Do not charge damaged battery packs
18
Do not probe with conductive objects
Have defective cords replaced
immediately
Discard the battery pack with due care
for the environment
Do not incinerate the battery pack

Package contents

The package contains:
1 Cordless midhandle drill/driver
1 Battery charger
1 Battery pack (K models)
2 Battery packs (KA models)
1 Screwdriver bit
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your cordless drill/driver BSA34 has been designed
for professional drilling and screwdriving applications.
1 Variable speed switch
2 Forward/reverse slider
3 Keyless chuck
4 Mode selector/torque adjustment collar
5 Collar settings
6 Two gear selector
7 Ventilation slots
8 Grip
9 Battery pack
Charger
Your EZAL20 charger accepts Elu NiCd battery
packs ranging from 7.2 V to 14.4 V.
Your EZAL20T charger accepts Elu NiCd battery
packs ranging from 7.2 V to 18 V.
E N G L I S H
en - 3

Publicidad

Tabla de contenido
loading

Tabla de contenido