Remington WDF4815C Manual Del Usuario página 6

ENGLISH
, Signs that your foils and cutters need replacing.
• Irritation: as foils get worn, you may experience skin irritation.
• Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
• Wear through: you may notice that the cutters have worn through the foils.
, TO REPLACE THE FOIL
16 Ensure the lady shaver is switched off.
17 Gently push the small plastic area at either end of the foil. The foil should
then easily detach from the head assembly.
18 To reassemble, slide the foil into foil bracket and click into position.
19 Close the head assembly.
, CAUTION
• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.
, TO REPLACE THE CUTTERS
20 Ensure the shaver is switched off and open the head assembly (as above).
21 To remove cutter, grasp cutter between the thumb and forefinger and pull
upwards.
22 To reassemble cutter, place cutter onto the oscillator tip. Gently push down
clicking into position.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
6