Care & Cleaning - Electrolux PLHS237ZAB3 Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at
least twice a year. Never use metallic scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any
surface. Do not wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall
outlet before cleaning.
CAUTION:
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may
damage the floor. Be careful not to move the refrigerator beyond the plumbing connections.
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
To avoid damage and help the refrigerator run as efficiently as possible, clean the condenser periodically.
NOTES:
Turning the freezer temperature control to OFF turns off the compressor, but does not disconnect electrical
power to the light bulb or other electrical components.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or, touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.
Part
Interior/Door
Liner
Door Gaskets
Drawers/Bins
Glass
Shelves
Toe Grille
Exterior and
Handles
Exterior and
Handles
(Stainless
Steel Models
Only)
Condenser
Coils
Care & Cleaning Chart
Cleaning Agents
Soap and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be
sure to wring excess water out of sponge or cloth before
Baking soda and
water
cleaning around controls, light bulb or any electrical part.
Wipe gaskets with a clean soft cloth.
Soap and water
Soap and water
Do not wash any removable items (bins, drawers, etc.) in
dishwasher.
Allow glass to warm to room temperature before immersing in
Soap and water
warm water.
Glass cleaner
Mild liquid sprays
Soap and water
Vacuum dust from front of toe grille. Remove toe grille (See
Mild liquid sprays
illustration on page 5). Vacuum backside and wipe with sudsy
Vacuum attachment
cloth or sponge. Rinse and dry.
Soap and water
Do not use commercial household cleaners, ammonia, or alcohol
to clean handles.
Clean stainless steel front and handles with non-abrasive soapy
Soap and water
water and a dishcloth. Rinse with clean water and a soft cloth.
Ammonia
Wipe stubborn spots with an ammonia-soaked paper towel, and
Stainless Steel
rinse. Use a non-abrasive stainless steel cleaner. These cleaners
Cleaners
can be purchased at most home improvement or major
department stores. Always follow manufacturer's instruction.
NOTE: Always, clean, wipe and dry with the grain to prevent
cross-grain scratching. Wash the rest of the cabinet with warm
water and mild liquid detergent. Rinse well, and wipe dry with a
clean soft cloth.
Vacuum attachment
Use the dusting tool attachment on your vacuum to remove dust
build-up on the condenser coils (see item "J" in illustration on page
17 for location).
Care & Cleaning
Tips and Precautions
18

Publicidad

Tabla de contenido
loading

Tabla de contenido