Bellman & Symfon Visit 868 Instrucciones página 121

Problem
Nothing happens when the power supply unit is
disconnected. Nor does the Test Button (11) work.
The LED p (6) on the Wrist Receiver blinks yellow!
The Bed-shaker does not vibrate when the Wrist Receiver is
activated.
The Wrist Receiver does not pick up signals from the
Bellman Visit 868 Transmitters.
The Wrist Receiver is emitting the wrong signals, regardless
of how the transmitter is set.
The receiver signals when no transmitter is activated.
Solution
• Charge or change the batteries. Only use rechargeable TMK AAA60CT NiMH batteries.
• Charge or renew the battery in the Wrist Receiver. Only use a rechargeable VARTA V40H
NiMH battery. If the battery is completely fl at, you can still use the Wrist Receiver by
placing it in the Charger. The Wrist Receiver needs to be charged for about two hours before
it can be used separately.
• Check that the bed-shaker is correctly connected to the Wrist Receiver Charger.
• Check that the Wrist Receiver has been correctly inserted in the Wrist Receiver Charger and
that the LED (12) lights up green.
• Check the batteries in the transmitters.
• Check that the Wrist Receiver is not placed too far away by moving it closer to the
transmitter.
• Check that the Bellman Visit 868 Wrist Receiver is set to the same Radio Key as the other
units in the relevant Bellman Visit 868 System. For further information see Appendix/
Further information/Settings/Radio key.
• Delete the advanced programming, see Appendix/Further information/Resetting advanced
programming.
• Change the Radio Key on all units in the relevant Bellman Visit 868 System. There is
probably another system nearby with the same Radio Key.
119
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
YU
APP