Bellman & Symfon Visit 868 Instrucciones página 51

Problem
The LED p (6) on the Wrist Receiver blinks yellow!
The Bed-shaker does not vibrate when the Wrist Receiver is activated.
The Wrist Receiver is not activated.
The receivers in the system transmit signals for no reason.
For further information about the product in English, refer to the Appendix.
Solution
• Charge or renew the battery in the Wrist Receiver. Only use a rechargeable
VARTA V40H NiMH battery. If the battery is completely fl at, you can still
use the Wrist Receiver by placing it in the Charger. The Wrist Receiver
needs to be charged for about two hours before it can be used separately.
• Check that the bed-shaker is correctly connected to the Wrist Receiver
Charger.
• Check that the Wrist Receiver has been correctly inserted in the Wrist
Receiver Charger and that the LED (12) lights up green.
• Check the batteries in the transmitters.
• Check that the Wrist Receiver is not placed too far away from the
transmitters by moving it closer to the transmitters.
• Check that the Wrist Receiver is set to the correct Radio Key. For further
information see Function/Radio key.
• Change the Radio Key on all units in the system. For further information
see Function/Radio key.
49
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
APP