Tabla de contenido
Publicidad
SPECIFICATION
Dimensions:
73.9 x 38.2 x 16.7mm
Display
Single 3-color LED Indicator
Battery
Built-in 900mAh
UNIPOD - 1.2Ω
Resistance
MESHED UNIPOD - 0.8Ω
MESHED UNIPOD - 16W
Output Power
UNIPOD - 11W
Charging Current
DC 5V/1A
Filling Method
Side Filling with Silicone Plug
POD Capacity
2ml
2
English
PACKING LIST
1 x VAPORESSO XTRA Battery
1 x MESHED UNIPOD
(2ml, 0.8Ω, Pre-installed)
1 x UNIPOD (2ml, 1.2Ω, In Box)
1 x USB Cable
1 x User Manual
1 x Warranty Card
1 x Reminder Card
USE INSTRUCTIONS
1. Fill the E-liquid
- Take out the POD from the battery,
uncover the silicone plug and gently
squeeze the e-liquid through the filling
hole. After the filling is completed, lock the
silicone plug back into place and make sure
it is tightly closed;
- If it is the first time to fill the POD, please
wait for 5 minutes for the e-liquid to soak
into the coil totally;
- The POD is suggested to be replaced after
5 times refilling.
2. Power on/off
Press the power button 5 times in 2s to turn it on or off. And the red, green and blue LED
lights will flash 1 time.
English
3
Publicidad
Tabla de contenido
