RIDGID RT1200M0 Manual Del Usuario página 25

ASSEMBLY
Locking Accessories
1. To Connect Accessory:
Your RIDGID Wet/Dry Vac includes
Locking Accessories to prevent the
Accessories from falling off when in
use. To connect the Accessories, align
the Nozzle Ridges of the Accessory with
the Release Button of your Extension
Wand. Press to secure the Nozzle to
the Extension Wand.
CONNECT:
Accessory Nozzle
Ridges
2. To Disconnect Accessory:
Twist the Nozzle and Extension Wand
to disengage the Nozzle Ridges and
pull. You may also press the Release
Button and pull to disengage.
DISCONNECT:
SP7078 RT1200M0.indd 25
Extension Wand
Release Button
Extension Wand
Release Button
Accessory Nozzle
Ridges
Inserting the Professional
Locking Hose
1. To Insert Hose:
Locate the end of the Professional
Locking Hose and align it with the Drum
Inlet. Align the Hose Release Button with
the Ridges on the Vac Inlet. Push the
Hose end straight into the Vac Inlet until
the Hose Release Button fully engages
the Inlet Ridges.
2. To Remove Hose:
(1) Rotate the end of the Professional
Locking Hose in either direction to
release the Hose Latch from the Inlet
Ridges.
(2) Press the Hose Release Button and
pull the Hose end straight out of the
Vac Inlet.
Hose
Release Button
Professional
Locking Hose
1
2
REMOVE
HOSE
Inlet Ridges
Hose Release Button
25
Drum
Vac Inlet
Ridges
1
INSERT
HOSE
1/5/19 8:54 PM