Installing Tool Holder - RIDGID RV24000 Manual Del Usuario

Drum/Caddy Assembly (cont.)

Installing Tool Holder

1. Position the Tool Holder to the Metal
Handle with Extension Wand Holders
(not included on all models) facing
the unit. Install the Tool Holder
by wrapping the Four Tote Straps
around the Metal Handle and Snap
each Strap in place, as shown.
Tote Snaps
SP6729-5 RIDGID ESF 111418.indb 10
2. As an alternative storage solution,
Tote
Straps (4)
Handle
Extension
Wand
Storage
Locations
(Not Included
On All Models)
10
the Tool Holder may hang on a wall.
Two wall mounting hooks (not
included with all models) must be
secured to the wall, as shown
(sold separately).
Grommet
Wall Mount
Hook
(Not Included
with All Models)
Wall
12/3/18 11:18 PM