Cord Maintenance - RIDGID RV24000 Manual Del Usuario

Maintenance (cont.)

Cord Maintenance

When vacuuming is complete, unplug
the Power Cord and wrap it around the
Powerhead Assembly. If the Power Cord
is damaged, it must be replaced by the
manufacturer or their service agent or by
similarly qualified personnel to reduce the
risk of accident.
Storage
Before storing your Vac, the Drum
should be emptied and cleaned. The
Power Cord should be wrapped around
the Powerhead Assembly and the Hose
should be stored as described in this
manual. Accessories should be kept in
the same area as the Vac so they can
be readily available. The Vac should be
stored indoors.
Model Numbers RV24000, RV26000,
Always order by Part Number - Not by Key Number
WARNING:
!
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry Vac.
WARNING:
!
All disassembly and repairs should be performed by qualified personnel.
SP6729-5 RIDGID ESF 111418.indb 19
Large Capacity — 2-Stage
Household Wet/Dry Vac
RV2400M0 & RV2600M0
Electrical Ratings:
120 V~ 11.5 A 60 Hz
RIDGID parts are available on-line at
store.ridgid.com/provacs
Casters and Wheels
Should your Cart squeak or become
hard to roll, you should place two or
three drops of general purpose oil on
each Wheel at the Axle. If your Casters
are noisy, you may put a drop of oil on
the Roller Shaft to make them quieter.
Frame and Handles
Your Metal Handle is painted to prevent
rust, however, liquids and corrosive
debris should be wiped off with a soft
cloth should they come in contact with
the Handle.
WARNING:
!
To assure product SAFETY and
RELIABILITY, any other maintenance,
repairs and adjustments should be
performed by Authorized Service
Centers, always using RIDGID
replacement parts.
19
12/3/18 11:18 PM