Forch 3885 53 Manual De Instrucciones página 18

Rechargeable LED-Inspection Lamp 4+1
ENG
Please read these instructions thoroughly in order to being able to fully utilize the
features of this device and to avoid faulty operation! Please keep the instructions for
later read and pass them on to other users of this device.
Scope of supply:
■ 1× rechargeable LED-inspection lamp 4+1
■ 1× charger with USB port
■ 1× USB cable
■ 1× hand strap
■ 1× user's manual
Technical data:
■
Art-No.:
■
Illuminant:
■
Battery:
■
Charging time:
■
Lamp functions: head lamp
■
Luminous flux:
■
Lighting time:
■
Operating temperature:
■
Input:
■
Magnets:
■
Clip:
■
Length:
■
Weight:
■
Charger:
Operation:
Startup:
1) Load completely before first operation
2) In case you store the lamp for a longer period, make sure to load it before storing
(minimum after 3 months)
Power ON / OFF:
1) Switch on the side lamp,
2) Switch on the head lamp
3) Switch the lamp off
Charge the battery:
1) connect USB-charger and USB-charging cable
2) connect the charger to the power supply
3885 53
1 × 1 W SMD LED
4 × 0,5 W SMD LED
Lithium-Ion battery pack,
3,7 V/1.400 mAh
approx. 4 h
up to 100 lumens
up to 5 h
100 – 240 V, 50/60/Hz
with 2 integrated holding magnets
90° pivoting
175 mm
approx.110 g
AC 100 – 240 V 50/60 Hz 5.0v /1.0 A .
press button 1×
press button 2×
press button 3×
side lamp
up to 150 lumens
up to 3 h
-10 °C up to +45 °C