30
PROGRAMMING MACHINE FUNCTIONS
With the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings out the full
aroma of the coffee and lends it an excellent fl avour. It is
possible to choose either "enabled" or "disabled".
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
In all new appliances this function has already been
enabled in the factory.
This procedure serves to activate all the settings made.
Press the button to set the
Prebrewing enabled (ON).
function.
Press the button to set the
Rinsing enabled (ON).
function.
Turn the machine off.
Turn the machine back on
to activate the programmed
functions.
Prebrewing disabled (OFF).
Rinsing disabled (OFF).