Cleaning And Maintenance - TEFAL Subito Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER.
• You can fill it through the spout, which ensures better maintenance of the filter.
(according to the model)
• Never fill the kettle when it is on its base.
• Do not fill it above the maximum level, or below the minimum level. If the kettle is too
full, boiling water may spill out.
• Do not use without water.
• Check that the lid is closed properly before use.
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.
5. FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH
Select the temperature according to your needs:
Position for boiling water or position for the ideal temperature for drinking
immediately. (fig 7)
6. TO START THE KETTLE
Press the on/off button positioned on the top or the bottom of the handle according to
the model. (fig 8)
7. FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH
if you move quickly from position to position after heating the water, the kettle has
to reinitialise. If you think that this is taking a long time, you can add cold water to speed
up the start of heating.
8. THE KETTLE MAY HAVE AN INTERNAL LIGHT, DEPENDING ON MODEL
9. THE KETTLE WILL SWITCH OFF AUTOMATICALLY
as soon as the water reaches boiling point or the chosen temperature. You can stop it
manually, before removing it from its base to pour the water. Depending on the model,
the interior light and the indicator light will go out when the water reaches boiling point.
Make sure that the on/off button is in the off position after boiling and that the kettle
has switched off before removing it from its base.
• Do not leave water in the kettle after use as this quickens the formation of scale.

CLEANING AND MAINTENANCE

CLEANING YOUR KETTLE
Unplug it.
Let it cool down and clean it with a damp sponge.
• Never immerse the kettle, its base, the cord or the electric plug in water: the electrical
connections or the switch must not come into contact with water.
• Do not use scouring pads.
CLEANING THE FILTER (ACCORDING TO THE MODEL)
The removable filter consists of a mesh to retain the particles of scale and prevent them
falling into your cup when pouring. This filter neither treats nor removes the hardness of
(fig 6)
(fig 9)
5
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ki160511

Tabla de contenido