Four UNO 30L_NC00028108_Mise en page 1 26/04/12 20:27 Page17
Setting the time
WARNING! Do not confuse the clock button
First use while empty
Before first use the oven must be operated while empty for 20 minutes to remove any possible manufacturing residue.
The oven is now plugged in and the time has been set. Press "mode"
knob
– fig.20.
The "convection" logo
The temperature flashes
"temperature"
– fig.25.
will flash
– fig.28.
Set the minutes: 20 minutes using the left rotating knob
– fig.30 – fig. 31.
Press
After plugging in the oven
the time as "00:00" with the hours flashing
left rotating knob
minutes will then flash automatically
rotating knob
To change the time press and hold the clock button for a few seconds.
and the delayed start button
should appear on the LCD screen
– fig.23.
Select the temperature: 240° using the left rotating knob
The hours will flash
– fig.26.
Leave the hours at 0. Validate by pressing the clock button
once to stop cooking
- fig.32.
–
fig.12, the digital display automatically shows
– fig.14.
Validate by pressing the clock button
– fig.16.
– fig. 17.
Validate by pressing the clock button again
.
– fig.19.
Select "convection" cooking mode using the left rotating
– fig.21.
Validate by pressing "mode" again
– fig.29.
Validate by pressing the clock button again
– fig.13.
Set the hour using the
– fig.15.
The
Set the minutes using the left
- fig.18.
– fig.22.
– fig.24.
Validate by pressing
– fig.27.
The minutes
EN
17