Working With The Device - ULTIMATE SPEED USSW 300 B2 Instrucciones De Funcionamiento Y De Seguridad

vehicle cigarette lighter
plug can lead to the plug
connection heating up.
Therefore when working
with high loads, always
use the connection cable
with the connecting
clamps.
Notes on disconnecting
from the power supply!
The On/Off switch of
„
this device does not
completely disconnect the
device from the electri-
cal system or battery.
When the motor vehicle
cigarette lighter plug is
connected, the device
takes power. In order to
disconnect the device
completely from the car's
electrical system, the
12 V motor vehicle cig-
arette lighter plug must
be unplugged from the
socket of the electrical
system/the connecting
Safety instructions
clamps must be removed
from the car battery.
Working with the
device
Before setup or first use,
„
check the device for any
damage and do not use
unless in perfect working
order.
Do not expose the device
„
to rain or wet weather.
Do not let the device
come into contact with
water. Do not immerse
the device in water. There
is a risk of electric shock!
Keep all openings of the
„
device free during oper-
ation. Do not block the
openings with your hands
or fingers, and do not
cover the device. There is
a risk of overheating!
In hot weather, do not
„
leave the device in a car.
This could permanently
damage the device.
GB/IE/NI/CY/MT
15