Connecting To A 12 V Motor Vehicle Cigarette Lighter Socket; Connecting To A Car Battery - ULTIMATE SPEED USSW 300 B2 Instrucciones De Funcionamiento Y De Seguridad

Instructions for operation
z Connecting to a 12 V
motor vehicle cigarette
lighter socket
Unscrew the red nut
„
car power inverter
the red eyelet of the cable with
12 V motor vehicle cigarette
lighter plug 12
opening over the screw
7
connector
Make sure that the washer is
positioned between the eyelet
and the nut 16
Tighten the red nut
„
that the eyelet is held in place.
Unscrew the black nut
„
the car power inverter
Guide the black eyelet of the
cable with 12 V motor vehicle
cigarette lighter plug
the opening over the 12 V
screw connector
Fig. 1). Make sure that the
washer is positioned between
the eyelet and the nut
Tighten the black nut
„
that the eyelet is held in place.
20 GB/IE/NI/CY/MT
16 on the
1 . Guide
with the
(see Fig. 1).
.
16 such
17 on
1 .
12
with
8 (see
17 .
17 such
Plug the cable with 12 V motor
„
vehicle cigarette lighter plug
12
into a motor vehicle
cigarette lighter socket.
Fig. 1
Note:
Due to the high transfer resist-
ances, using the cable with 12 V
motor vehicle cigarette lighter
plug 12 can lead to the plug
connection heating up. Therefore
when working with high loads,
use the connection cable with the
10 11
and connecting clamps.
z Connecting to a car
battery
Unscrew the red nut
„
car power inverter
the red eyelet of the cable with
16 on the
1 . Guide