Korg pitchblack+ Manual De Usuario página 5

Flat tuning
You can tune your instrument down to seven
semitone steps below the note name shown in
the display.
Input jacks
pitchblack+
The provides two input jacks,
INPUT A and INPUT B. You can specify
calibration, tuning mode, flat tuning, and
display mode individually for each input jack.
If you've connected an instrument to only one
of these jacks, you'll be able to choose from two
sets of settings for your instrument.
Display mode
You can choose from six types of display
patterns for the LED meter. A variety of
illumination patterns are provided, including a
Meter that lights in the center when you're in
tune, a Strobe type meter that stops the flow of
illumination when the tuning is correct, and
Focus that uses dual LED meters to allow even
higher precision tuning.
BYPASS jack
When the tuner is off, the bypass output
delivers true bypass, in which the output signal
is completely unaffected by the internal
circuitry. The bypass output is muted when the
tuner is on.
DC 9V OUT jack
If you're using the optional AC adapter (9V
), you can use the included DC cable to
supply power for effect pedals that use
9V ( ). (A maximum of 200 mA can be
supplied.)
5