Technical Data; Ec Declaration Of Conformity; English - DeWalt D21160 Manual De Instrucciones

RIGHT ANGLE DRILL D21160
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
No-load speed
Maximum drilling range in
steel/softwood
Spindle thread size
Minimum chuck capacity
Maximum chuck capacity
Weight
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
D21160.PM7
D21160
V 230
V 230/115
W 350
-1
min 1,200
mm 10/20
mm 3/8 x 24
mm 0.8
mm 10
kg 1.7
17
EC-Declaration of conformity
D21160
D WALT declares that these power tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, 86/188/EEC, EN 60745-1,
EN 60745-2-1, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
L (sound pressure)
pA
L (acoustic power)
WA
Weighted RMS acceleration value
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
12-09-2005, 16:45
E N G L I S H
WALT at the
E
D21160
dB(A) 80
dB(A) 91
m/s 2 2.2
dB(A) 2.8
dB(A) 2.8
17