Sanus Systems VMPL2 Instrucciones De Armado página 3

Thank you for choosing a Sanus Systems Vision Mount Wall Mount. This product is designed to mount flat panel televisions weighing
up to 175 lb. to a vertical wall. It allows you to mount your television flat against the wall or at a fixed 5 degree tilt.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified
contractor or contact Sanus at 800.359.5520 (US) or 31 (0)20 5708938 (Europe). You can also visit our web site at www.sanus.com. We
can quickly assist you with installation questions and missing or damaged parts. Replacement parts for Sanus products purchased through
authorized dealers will be shipped directly to you. Check carefully to make sure there are no missing or defective parts. Never use defective
parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by
Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Note: The supplied wall mounting hardware is not for steel stud walls or old cinder block walls. If you are uncertain about the nature of
your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware is included.
If the hardware you need is not included please consult your local hardware store or call Sanus Systems.
Required Tools: 3/16 drill bit, 1/2" Masonry Bit for brick concrete or concrete block installations, wrench or socket set, Phillips screw
driver.
Supplied Parts:
(1) Wall Plate - a
(4) M4 x 12 Bolt - e
(4) M6 x 12 Bolt - i
(4) M4 Lock Washer - m
(4) M4/M5 Spacer - q
(6) Lag Bolt - u
(4) Carriage Bolt - w
Assembly Instructions for VMPL2 Flat Panel Wall Mount
(4) M4 x 30 Bolt - f
(4) M6 x 35 Bolt - j
(4) M5 Lock Washer - n
(4) M6/M8 Spacer - r
(1) Safety Bar - b
(4) M5 x 12 Bolt - g
(4) M8 x 16 Bolt - k
(4) M6 Lock Washer - o
(6) Lag Bolt Washer - s
(2) Monitor Bracket - c (4) Gusset - d
(4) M5 x 30 Bolt - h
(4) M8 x 40 Bolt - l
(4) M8 Lock Washer - p
(8) M4/M5 Washer - t
(6) Concrete Anchor - v
(4) Gusset Nut - x