Descargar Imprimir esta página

Sanus Systems VMPL2 Instrucciones De Armado página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
Step 3: Attaching the Monitor Brackets to a TV with a flat back
WARNING: DO NOT LAY THE TELEVISION FACE DOWN ON THE GLASS, lean it up against a wall or other solid surface!
Laying the television down on the glass may cause permanent damage.
The Monitor Brackets (c) should be placed as vertically close to center of the television as possible before installation. For a flat back TV
that requires the M4 or M5 diameter Bolt, thread a M4 x 12 (e) or a M5 x 12 (g) Bolt through the appropriate Lock Washer (m,n), an M4/
M5 Washer (t), the Monitor Bracket and finally into the TV. See Detailed View A of Diagram 3 for assistance. If your TV requires the M6
or M8 diameter Bolt thread a M6 x 12 (i) or a M8 x 16 (k) Bolt through the appropriate Lock Washer (o,p), through the Monitor Bracket
and into the TV. See Detailed View B of Diagram 3 for assistance. Proceed to tighten the Bolts firmly with a phillips screw driver.
Detailed View A
Step 4: Attaching the Monitor Brackets to a television with a curved back
WARNING: DO NOT LAY THE TELEVISION FACE DOWN ON THE GLASS, lean it up against a wall or other solid surface!
Laying the television down on the glass may cause permanent damage.
The Monitor Brackets (c) should be placed as vertically close to center of the television as possible before installation. If your TV has
a curved back and requires either a M4 or M5 diameter bolt, thread a M4 x 30 (f) or a M5 x 30 (h) Bolt through the appropriate Lock
Washer (m,n), an M4/M5 Washer (t), the Monitor Bracket, an M4/M5 Washer, a M4/M5 Spacer (q) and into the TV as seen in Detailed
View A of Diagram 4. If you determined that your TV requires a Bolt with a M6 or M8 Diameter, thread a M6 x 35 (j) or a M8 x 40 (l)
Bolt through the appropriate Lock Washer (o,p), the Monitor Bracket, a M6/M8 Spacer (r) and into the TV as seen in Detailed View B
of Diagram 4. Proceed to tighten the Bolts firmly with a phillips screw driver.
Detailed View A
t
q
e,g
m,n
t
c
c
f, h
m,n
t
Diagram 3
Diagram 4
Detailed View B
i,k
o,p
c
Detailed View B
c
j,l
o,p
r

Publicidad

loading