Package Contents; Pulsar Al-915 Laser Ir Illuminator; Safety Rules - Pulsar AL-915 Instrucción

SPECIFICATIONS
Lens diameter, mm
Safety class for laser equipment (according to
laser equipment standard IEC60825-1)
Output power for laser radiation,
not more than, mW
Wavelength, nm
Range of beam divergence (HxV), degree
Power Supply, V
Average operation time
with one set of batteries, hour
Operating temperature (at +22 °С )
Dimensions, mm/inch
Weight (without/with batteries), g / oz

PACKAGE CONTENTS

Pulsar AL-915 Laser IR Illuminator

Carrying case
Adapter for devices with a 1/4" socket
Cleaning cloth
User manual
For improvement purposes, design of this product is subject to change.
DESCRIPTION
The high-power Pulsar AL-915 Laser IR Illuminator is designed to provide
additional infrared (IR) illumination during observation with night vision
devices in very low light conditions (no moon, heavy cloud etc.), including
complete darkness. A peculiar design of the Illuminator guarantees crisp and
clear image across the entire field of view. The Pulsar L-915 operates in the
invisible range which ensures covert observation. The Laser IR Illuminator
allow you to:
2
79133
22
1
20
915
7.2 / 2.3 - 3.6
3 (2xAA)
5
-25 °С ...+50 °С / -13 °F...+104 °F
130x46x60 / 5.1x1.8x2.4
130 / 170 // 4.6 / 6
increase detection range;
identify objects more accurately;
get a more detailed image of the observed object;
adjust beam from spot to flood;
smoothly adjust power depending on viewing conditions.
The Illuminator is equipped with a standard Weaver mount which allows you to
affix it to Pulsar devices with a Weaver rail, such as:
digital riflescopes (Digisight series);
digital monoculars (Digiforce series);
other digital devices equipped with Weaver rail.
The Illuminator is supplied with an adapter that enables the Flashlights to
be attached to any Pulsar (or other) NV device equipped with a 1/4"
socket. You can also use the Flashlights as a hand-held unit.
Read carefully all safety and usage rules set forth in the user manual
before switching on the Illuminator!

SAFETY RULES

The Illuminator complies with the Class 1 pursuant to standard
IEC60825-1. This guarantees safety of the device. However avoid
looking directly at the working laser diode.
Keep the device away from water or humid environment. Ingress of
water may disable the device.
Do not disassemble or repair the device. Should any problem arise,
please contact manufacturer for qualified support.
APPLICATION
Remove the Illuminator from the carrying case.
Turn the knob of the battery cover 90° counterclockwise, remove the
cover and install two AA batteries (or rechargeable batteries) as
indicated (see illustration). Close the cover and lock.
3