Introduction; Connexxlink Wireless Programming System - Siemens ConnexxLink Manual Del Usuario

Introduction

ConnexxLink® is a wireless programming system for all hearing
instruments equipped with e2e wireless® 2.0 and e2e wireless 3.0
in the following families:
binax™
• Insio™ 7bx, 5bx, 3bx
• Carat/Carat A 7bx, 5bx, 3bx
• Pure® 7bx, 5bx, 3bx
• Motion® SX/SA 7bx, 5bx, 3bx
• Motion PX 7bx, 5bx, 3bx
micon™
• Aquaris™ 7mi, 5mi, 3mi
• Insio™ 7mi, 5mi, 3mi
• Motion 7mi, 5mi, 3mi
• Nitro® BTE 7mi, 3mi
• Pure 7mi, 5mi, 3mi
Place ConnexxLink around your patient's neck and wirelessly
connect your patient's hearing instruments to the programming
software on the PC. No programming cables are necessary.
Follow these instructions to set up ConnexxLink and to
understand how ConnexxLink works.
For instructions on programming a hearing instrument
please refer to the specific Fitting Guide.
2
XCEL
• Motion 701, 501, 301, 101
• Pure Carat 701, 501, 301
• Pure 701, 501, 301
Essentials
• Orion™ BTE
• Orion Custom
• Orion RIC
• Sirion™ BTE
Legacy
• Aquaris 701, 501
• Motion 701, 501, 301
• Nitro 701, 301
• Pure 701, 501, 301
ConnexxLink wireless
programming system
Rechargeable Li-ion Battery
®
Rated 3.7V 1000mAh
Caution
Do not short circuit
Do not pierce or crush
Do not disassemble
Charge the batterz between
0ºC and 60ºC
MFD: 0723
SN: 01507
①
ConnexxLink
②
On/Off button
③
Neckloop
④
USB Bluetooth® dongle
⑤
Rechargeable battery
⑥
Charging cradle with
USB cable
⑦
Power supply and adapters
7
3