Guided Setup; Starting Guided Setup; Setting Up Your Tv - Hisense 40H4C1 Manual Del Usuario

With the preliminaries out of the way, it's time to turn on your TV. As the TV starts for the first time, it leads you through Guided
Setup, which configures the TV before you start to use it.
During Guided Setup, you'll:
• Answer a few questions
• Provide network connection information
• Get a software update
• Link the TV to your Roku account
• Connect devices such as a DVD player, game console, or cable box
NOTE
• Guided Setup only runs the first time you turn on your TV. If you need to run Guided Setup again, you'll have to perform a
factory reset, as explained in

Starting Guided Setup

To start Guided Setup, press the red [POWER] button on the remote control to turn on your TV.
When you first turn on your TV, it will take a few seconds to get itself ready. You'll notice the following things happening:
The status light blinks every time the TV is busy doing something; in this case it's powering up and getting ready for you.
The Power-on screen appears and the status light blinks slowly for a few more seconds. The Power-on screen displays a
TV logo while the TV starts up.
After a few seconds, the Guided Setup starts.
If the TV prompts you for a language, press the [DOWN] on the remote control to highlight your preferred language.

Setting up your TV

With the first Guided Setup screen on your TV, follow these steps to set up your TV:
1. Press the [OK] or [RIGHT] buttons on the remote control to go to the next screen:

Guided Setup

Factory reset everything on page 40.
6