Watching Broadcast Tv Channels; Changing Channels - Hisense 40H4C1 Manual Del Usuario

MUTE
STREAMING
CHANNEL
SHORTCUT
NOTE
• For information about using a Universal Remote, refer to the

Watching broadcast TV channels

To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last channel you watched and
starts with that channel playing.
Tip: You also can use the buttons on the TV panel to select Antenna TV, as explained in

Changing channels

To change channels, you can do any of the following:
Press [UP] to change to the next higher channel.
Press [DOWN] to change to the next lower channel.
Press [LEFT] to display the channel list, and then press [UP] and [DOWN] to move the highlight through the list one
channel at a time. Or press [REVERSE SCAN] and [FORWARD SCAN] to move the highlight through the list one page
at a time. When you've highlighted the channel you want to watch, press [OK]. (If you decide you don't want to change
channels, press [RIGHT] or [BACK]).
Press [ ] to jump to the previous channel. Press again to return to the channel you were watching before you pressed [
Viewing program information
To view information about the current program, press [OK]. The TV displays a banner at the bottom of the screen with as much
information as is available in the program data stream.
Program information, subject to availability, includes:
• Channel number
• Channel call sign
• Signal strength
Using your TV
Mutes the TV sound. A volume indicator shows the current volume level and a mute icon
when you press this button and for a few seconds afterward. If Closed captioning is set to
On mute, captions are displayed while the TV is muted.
Dedicated buttons show the logo of a featured streaming content provider. Pressing a button
turns on the TV, and if the TV is connected to the Internet, performs one of the first two
following actions:
• Displays the main page of the streaming channel if you have already added the channel to
your Home screen.
• Displays the sign-up page for the streaming channel if you have not already added the
channel so that you can agree to any terms and fees for the service.
• If the TV is in 'Standby' mode (off), turns the TV on. And, if it is connected to the Internet,
the TV performs one of the first two actions listed above.
Program information banner
Other devices on page
21
42.
TV panel buttons on page 18.
].