Getting Started
Start Dishwasher
6
Start
Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay
Hours/Delay countdown. The wash cycle will begin shortly after closing the door. The display
will turn off if the door remains open for two minutes. To activate the display, close and open the
door or press any pad.
Interrupt or
To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
Pause
cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press Start, and close the door within 4 seconds.
Cancel
To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
Cycle Indicator Lights and Sounds
7
Sanitized
Displayed at end of the cycle when Wash Temp Sani/Sanitize Temp/Presoak+Sani has been
or Cycle
selected and dishwasher has met requirements for sanitization. See Wash Temp Sani/Sanitize
Sanitized
Temp/Presoak+Sani, for complete description. Closing door or pressing any pad will turn off
light.
Clean
Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
or Cycle
clean. The light will turn off when the door is opened.
Complete
Low Rinse
Displayed when rinse agent is low or empty. See Use a Rinse Agent section. To turn indicator
Aid
off, press the Pre-Soak or Steam pad 7 times within 5 seconds. Repeat this process to turn the
(on some
Low Rinse Aid indicator back on.
models)
Cycle
The indicator light on the door front will change color to indicate the wash status. During the
Status
wash cycle, the indicator light will be amber or white depending on the model. When the wash
(on some
cycle is complete, the light will change to green.
models)
Sounds
The dishwasher will emit a sound to indicate cycle completion, pad presses, and door ajar. To
mute all sounds, press the Heated Dry/Dry or Ultra Dry pad 7 times within 5 seconds. Repeat
this process to turn sounds back on.
Mute
To turn the dishwasher control sounds ON/OFF, press the Heated Dry/Dry or Ultra Dry pad 7
times within 5 seconds.
Sabbath/
To turn this option ON/OFF, press and hold the Start/AutoSense/Auto and Wash Temp/Hi
Door
Temp Wash/Wash Temp Boost pads for 5 seconds, close the door and wait 3 minutes for the
Wake Up
dishwasher to go into sleep mode. In the OFF mode, the control display, control sounds, and
Mode
interior lights
(on some
used when observing certain religious holidays such as the Sabbath. To activate the control and
models)
interior lights
49-4000042 Rev 3
(on some models)
will not respond to the door opening/closing. This mode can be
(on some
models), press any pad.
9