Technical Data - Skil MT1 1928 Serie Manual Original

a
Laser measure
INTRODUCTION
• This tool is intended for measuring
distances indoors as well as outdoors
by means of laser beam projection
• This tool is intended for measuring
distances without a projection target or
on curved surfaces with the measuring
wheel (1929)
• The measuring tool is suitable
exclusively for operation in enclosed
working sites
• This tool is not intended for
professional use
• Save these instructions for future
reference and include them with
the measuring tool when giving it
to a third party

TECHNICAL DATA

Distance measuring
range*
Distance measuring
accuracy*
Smallest measuring unit 0.001m
Operating temperature
Storage temperature
Relative humidity (max.) 90%
Laser class
Laser type
Battery
Weight
Dimensions (length x
width x height)
* Important: under unfavourable
conditions (e.g. in bright light, or poor
reflection) the tool's measuring range and
accuracy will be reduced
1928/1929
0.2-25m (1928)
0.2-30m (1929)
± 3mm
0°C to 40°C
-20°C to +70°C
2
635nm, <1 mW
2x 1.5V AAA
(LR03) alkaline
0.075 kg (excl.
battery)
114 x 43 x 23
mm
6
TOOL ELEMENTS 1
A Exit opening for laser beam
B Reception lens
C Display
D Battery lid
E Latch of battery lid
F Wheel (1929)
G Side button
H Main button
SAFETY
• All instructions must be read and
observed in order to work safely
with the measuring tool 2
• If the equipment is used in a manner
not specified by the manufacturer, the
protection provided by the equipment
may be impaired
• Never make warning signs on the
measuring tool unrecognisable
• -The use of other operating
or adjusting equipment or the
application of other processing
methods than those mentioned
here can lead to dangerous
radiation exposure
• Do not direct the laser beam at
persons or animals and do not
stare into the direct or reflected
laser beam yourself, not even
from a distance (you could blind
somebody, cause accidents or
damage your eyes) 4
• If laser radiation strikes your eye,
you must deliberately close your
eyes and immediately turn your
head away from the beam
• Do not make any modifications to
the laser equipment
• Have the measuring tool repaired
only through qualified specialists
using original spare parts (this
ensures that the safety of the
measuring tool is maintained)
• Do not allow children to use
the laser measuring tool
without supervision (they could
unintentionally blind other persons or
themselves)
• Do not operate the measuring tool
in explosive environments, such
as in the presence of flammable
liquids, gases or dusts (sparks can