Installation Instructions; Step 1 - Unpacking - Haier HMV1640 Instrucciones De Instalación

INSTALLATION INSTRUCTIONS

Disconnect electrical power at the fuse box or circuit breaker box
before installing microwave.
Failure to do so can result in death or electrical shock.
STEP 1 – UNPACKING
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
1. Using two or more people move the microwave to near the location where it is to
be installed.
2. Remove the installation instructions, filters, glass tray and the small hardware
bag. Do not remove the foam packaging from the front of the oven.
3. Fold back all four carton flaps fully against carton sides. Then carefully roll the
oven and carton over onto the top. The oven should be resting in the foam
packaging.
a
6
WARNING
Electrical Shock Hazard
WARNING
Excessive Weight Hazard
b
a
Styrofoam
b
Carton