Installing Windows - ASROCK AD2700-ITX Manual De Instrucciones

Print Port Header
(25-pin LPT1)
(see p.2 or 3 No. 1)
Serial port Header
(9-pin COM1)
(see p.2 or 3 No. 2)
2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.10 Installing Windows

If you want to install Windows
below steps.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
22
ASRock AD2700-ITX / AD2500-ITX Motherboard
AFD#
ERROR#
PINIT#
GND
SLIN#
1
SPD7
SPD6
ACK#
SPD5 BUSY
SPD4 PE
SPD3
SLCT
SPD2
SPD1
SPD0
STB#
®
7 on SATA / SATAII HDDs
®
7 OS on your SATA / SATAII HDDs, please follow
Advanced screen
®
7 OS on your system.
Advanced screen
®
7 OS on your system.
This is an interface for print
port cable that allows
convenient connection of printer
devices.
This COM1 header supports a
serial port module.
Storage Confi guration.
Storage Confi guration.