Reset Factory Settings - Allmatic AM1 PAD Manual Del Usuario

Enter programming mode
Select menu 3 by pressing
Enter the new 4 digit master code twice.
Exit the programming mode
Disconnect keypad power supply.
Press and maintain pressure while reconnecting power until you hear the sound signal.
Enter programming mode
Select the menu by pressing
Enter programming mode
Select the menu 7 by pressing
Pass the MASTER CARD.
Exit the programming mode
Enter programming mode
Select the menu 7 by pressing
To replace registered MASTER CARD press
KEY:
O
4 / 12 - English
Change MASTER CODE
.
.
Reset default MASTER CODE: "1234"

Reset factory settings

Clear all codes and cards and reset master code ("1234").
.
Create MASTER CARD
The MASTER CARD allow to enter programming mode.
.
.
Delete or change MASTER CARD
.
G
= LED Orange; = LED Green;
= Small sound;
R
= LED Red; = LED flashing
= Long sound
O
O
G
O O
G O
O
G O
G O
6-1622780 - rev.4 - 02/08/2021