Allmatic AM1 PAD Manual Del Usuario página 17

Pass the new MASTER CARD if needed.
Exit the programming mode
Enter programming mode
Select the menu 1 by pressing
Input delay from 01 to 99 seconds
Or input 00 for bistable function.
Exit programming mode
Enter programming mode
Select the menu 5 by pressing
Input delay from 01 to 99 seconds
Or input 00 for bistable function.
Exit programming mode
Attention!
• MASTER CODE can't unlock the door.
• Codes/cards must be different between the two relays and MASTER CODE.
• After 5 input errors the keypad will be blocked during 60 seconds.
MODE 1: CARD ONLY
Enter programming mode
Select the menu by pressing
Input the memory rank from 000 to 999.
KEY:
O
6-1622780 - rev.4 - 02/08/2021
.
Relay time delay
.
(2 digit).
.
.
(2 digit).
.
Add one USER
(1000 memorizable codes)
.
(3 digit)
G
= LED Orange; = LED Green;
= Small sound;
RELAY 1
RELAY 2
RELAY 1
Memory rank free.
R
= LED Red;
= Long sound
G
= LED flashing
English - 5 / 12
O
O
O
O
O
O
O