Dörr Smart Light LCD 300 Manual De Instrucciones página 5

DÖRR
Studio Flash Smart Light LCD 300 / 200
Instruction Manual
Thank you for purchasing a DÖRR Studio Flash. Please read the following instructions carefully before starting to operate the flash.
If you require additional information, please contact your local DÖRR representative or mail to export@doerrfoto.de.
1. Specifications
1.
2.
Specifications Flash Head Smart Light LCD 300
Flash Power 300 Ws
Guide No. 52
Variably adjustable
Variable Power Range
from full ratio to 1/32
Flash Recycling Time 3
Flash Duration 1/500
Modelling Light 50W
Test button, photo sensor, sync cord
Flash Triggering
sync distance ≤ 10m
Color Temperature 5600K
Power Source AC 200 - 240V / 50 Hz
Weight 1.8 kg
Measurements 16 x 16 x 22cm
AC Adapter, Flash Bulb (inserted)
Supplied with
Modelling Light Bulb (inserted)
Fuse 6,3 Ah / 250V
Description of Flash Head
1. On/Off Switch
2. Sync Socket
3. Power Socket
4. Fuse
5. Flash / Confirm Button (twist or press)
6. Flash Test Button
7. Mode Button
8. LC Display (see description below)
9. Photo Sensor
10. Flash Ready Indicator (green LED)
www.doerrfoto.de
9.
8.
7.
6.
10.
5.
4.
3.
Flash Head Smart Light LCD 200
200 Ws
42
Variably adjustable
from full ratio to 1/32
3
1/500
50W
Test button, photo sensor, sync cord
sync distance ≤ 10m
5600 K
AC 200 - 240V / 50 Hz
1.65 kg
16 x 16 x 22cm
AC Adapter, Flash Bulb (inserted)
Modelling Light Bulb (inserted)
6,3 Ah / 250V
a b
h
Description of LC Display
a. Acoustic Flash Ready Signal
b. Triggering via Photo Sensor
c.
d. Modelling Light Mode Display
e.
f. Charging Status of Flash
g. Flash Counter (counts number of fired flashes)
h. Flash Power Control
i. Modelling Light Power Control
j. Selected Flash Mode - Triggering via Photo Sensor
Modelling Light Bulb
Flash Bulb
j
i c d e
5
f
g