Finishing The Installation - Fanaway Corbelle Instrucciones De Instalación

Fanaway Corbelle Installation Instructions
•
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling fan
wiring via the quick connector plug.
•
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan's
accessible metal body and lamp base back to the earth terminal at the terminal block on the mounting
bracket.
•
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and
that the wires are not damaged during this step. Secure the canopy to the hanger bracket using the screws
provided. (Fig. 10)
•
Switch ON mains power supply to the fan. Test the fan operations or enjoy using the fan following
instructions the under "USING YOUR CEILING FAN" section of this instruction manual.
9 | P a g e
Fig. 9

FINISHING THE INSTALLATION

Fig. 10