Hoover air revolve Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

rettes, matches, or hot ashes.
• Do not clean over floor electrical outlets.
• Do not use without filters or dirt cup in place.
• Always turn off this appliance before connecting or disconnecting
either hose or motorized nozzle.
• Hold plug when rewinding onto cord reel. Do not allow plug to
whip when rewinding.
• The hose contains electrical wires. Avoid picking up sharp objects.
If hose appears damaged, cut, punctured or wires are exposed,
unplug unit and discontinue use. Do not attempt to repair dam-
aged hose, take to an authorized service center for repair.
WARNING:
known to the State of California to cause cancer, birth defects or
reproductive harm. WASH HANDS AFTER HANDLING.
WARNING:
ELECTRIC SHOCK, THIS APPLIANCE HAS A POLARIZED
PLUG (ONE BLADE IS WIDER THAN THE OTHER). THIS
PLUG WILL NOT FIT IN A POLARIZED OUTLET ONLY ONE
WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET.
DO NOT CHANGE THE PLUG IN ANY WAY.
This product contains chemicals
TO REDUCE THE RISK OF
CAUTION:
TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may
cause damage.
• Store appropriately indoors in a dry place. Do not expose machine
to freezing temperatures.
• Do not use sharp objects to clean out hose as they will can
cause damage.
• Do not allow power nozzle with brushroll running to sit in one
location for an extended period of time as damage to floor
can result.
! NOTICE !
A thermal protector has been designed into your cleaner to protect it
from overheating. When the thermal protector activates the cleaner
will stop running. If this happens, proceed as follows:
1. Turn cleaner OFF and unplug It from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, wand and pre-motor
filter for any obstructions. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the
thermal protector will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above
steps, your cleaner needs servicing.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido